久久无码视频一区,国产精品自在线国产,国语自产精品视频在线区,精品与欧美交牲久久久久,精品人成在线电影,久久精品爱看无码免费视频,日韩高清一区精品,看日本东京热免费特黄视频

專家信息：

高世橋，男，1961年出生于遼寧，博士，教授，博士生導師，享受國務院政府津貼，德國洪堡基金獲得者�，F(xiàn)任教于北京理工大學宇航科學技術學院。從事非線性結構動力學、沖擊動力學及微機電技術研究。先后在國際、國內的重要學術刊物上發表學術論文80余篇，獲多項國家、省部級獎。

教育經歷：

1978年9月——1982年6月北京工業學院力學工程系本科學歷

1982年9月——1985年6月北京工業學院力學工程系碩士研究生學歷

1985年9月——1987年6月上海工業大學力學系博士研究生學歷

1990年9月——1992年6月德國魯爾大學土木工程系博士后

工作經歷：

1987.12 上海工業大學博士畢業后，在北京理工大學任講師；

1990.12-1992.11 獲洪堡基金在德國魯爾大學做博士后研究；

1992.11-1996.7 在北京理工大學 機電學院力學工程系副教授；

1996.7-1999.12 在北京理工大學任教授；

1999.12-至今在北京理工大學機電學院力學工程系教授, 博士生導師；

2004 年9月至今德國魯爾大學，土木工程系，客座教授。

主講課程：

1、本科生《彈性力學》；

2、碩士研究生《非線性隨機振動與抗振分析》；

3、碩士研究生《結構動力學》。

科學研究：

研究方向：

主要從事微機電技術，高速條件下的控制技術的研究。

科研項目：

1. 微機電系統在武器中應用的發展戰略研究;

2. 微機電模塊化引信的概念研究;

3. 彈侵徹混凝土目標的動力特性研究;

4. 結構非線性隨機動力響應研究

主要成就：

高世橋教授多年來主要從事微機電系統技術、沖擊動力學、一般結構動力學方面的研究。在“基于微機電技術（MEMS）的系統控制技術”、“大型結構在災害性載荷作用下的動力特性、安全性及穩定性”、“結構非線性隨機動力響應”、“現代設計方法”等方面取得了重大的成果。在自主創新方面，他提出了“極限密度”、“法向膨脹”、“崩落摩擦角”等多個概念和“缺陷單元法”、“隨機子結構法”、“迭代線性化法”、“樣本響應法”等多種方法。

在彈藥技術、引信技術、沖擊動力學、結構動力學方面的研究獲部級科技進步獎七項，發表論文60余篇。獲獎項目有：1、大型工業冷卻塔殼體靜動力穩定性及響應研究（二等獎）；2、引信動溫度研究（二等獎）；3、引信機電一體化技術（二等獎）；4、彈目碰擊時的受力函數研究（三等獎）；5大型結構非線性隨機動力響應（AVH證書）；6、飛航導彈總體參數設計（三等獎）。論文中有10余篇被收錄三大檢索。

高教授適應時代的需要，努力從事材料沖擊破壞動力學方面和結構安全動力學方面的研究。在相關的計算理論上取得突破，在“結構非線性隨機動力響應”、“混凝土材料結構在沖擊載荷作用下的破壞特性”方面取得了重大的成果，應用于混凝土工程和地下防衛攻勢等方面，促進了相關民用和軍用產業的發展。

1995年，北京理工大學領導大膽從科研第一線引入專業人才進行財務管理。在領導信任和期盼的目光中，高世橋走上了財務工作崗位，如今十年過去了，高教授也逐漸成長為一位杰出的理財專家，讓財務更好的服務于高�？蒲泻徒虒W(xué)。他組織建立了資產經營體系，小康平臺架構，核算、結算兩個中心。初次從事財務工作時，他一方面做好基本的財務管理服務工作，另一方面又發揮自己的專業優勢，配合教學科研進行財務上的調整。在科研經費的爭取、管理和使用上，他表現出了杰出的才能。科研經費是開展科研工作的重要基礎，目前國家及教育部科學基金項目等均采用自由申請，但所得科研經費只限于科學研究本身，而現行科研人員收入并不與其所承擔的科研項目多少、完成質量的好壞以及貢獻的大小直接掛鉤，不利于科研成果產出的提高。面對這些問題，高世橋教授以專家的眼光認真思考對待，他重視科研成本核算，強調科學和據實列支，著眼科研的投入產出效益，提高了科研工作的效率。主張教學科研相輔相成，相得益彰，經濟上相互支撐，成果上相互共享。他始終堅持教學和科研“兩個中心”，爭取為基層教學提供更多的基金，通過不斷完善財務管理制度來促進提高教學工作者的積極性，同時以教學促進科研能力的提高。就這樣，在這十個春秋里，他嘔心瀝血地工作著，每年為學校增收3000多萬元，回收了1000多萬的水電成本，并節約出了近1000平方米的科研空間。十年艱辛，他終于沒有辜負領導的期望，將科研與財務管理這兩樣人們看來似乎沒有多大聯系的事業完美的結合在一起，實現了科研人力資源和物力資源最為合理和有效的配置。

發明專利：

發明公開：

[1]牛少華,高世橋,金磊,隋麗,劉海鵬,李夢梅,代俊,石庚辰. 用于彈體侵徹目標過程的磁電式發電機及發電方法及應用[P]. CN114709997A,2022-07-05.

[2]熊雷,高世橋,金磊,郭勝凱,杜學達. 一種電磁式風致馳振能量采集裝置[P]. CN114499097A,2022-05-13.

[3]郭勝凱,高世橋,金磊,尹作宗,李澤章. 一種升頻式壓電-電磁俘能裝置[P]. CN111628674A,2020-09-04.

[4]牛少華,高世橋,金磊,隋麗,劉海鵬,李夢梅,代俊,石庚辰. 磁電式發電機及其應用[P]. CN110829778A,2020-02-21.

[5]李澤章,高世橋,彭世剛,劉海鵬,金磊. 一種基于杠桿效應位移放大音叉式微機械陀螺儀[P]. CN110307832A,2019-10-08.

[6]劉海鵬,高世橋,高春暉,金磊,李澤章,彭世剛. 多模復合式上變頻振動式環境能量采集器[P]. CN110289786A,2019-09-27.

[7]張希洋,高世橋,金磊,劉海鵬,牛少華,郭勝凱. 光伏-壓電-電磁復合式俘能器[P]. CN109889096A,2019-06-14.

[8]郭勝凱,高世橋,金磊,劉海鵬,牛少華,張希洋. 靜電-壓電-電磁復合式俘能器[P]. CN109818522A,2019-05-28.

[9]劉峰,高世橋,郭建昌,牛少華. 一種復合梁結構的壓阻式MEMS加速度傳感器及封裝裝置[P]. CN109231155A,2019-01-18.

[10]高世橋,閆麗,金磊,張希洋,張廣義. 一種多自由度上變頻復合式振動俘能器及其應用[P]. CN108683359A,2018-10-19.

[11]劉海鵬,閆麗,高世橋,張廣義,吳君汝. 一種多自由度上變頻壓電俘能器[P]. CN108566119A,2018-09-21.

[12]劉海鵬,高世橋,金磊,周瀟雅,路俊虎. 一種基于汽車振動的俘能裝置[P]. CN107465324A,2017-12-12.

[13]董新博,劉海鵬,高世橋,張廣義,陳林雄. 一種小型電磁擺動式俘能器[P]. CN105703598A,2016-06-22.

[14]管延偉,高世橋,劉海鵬,李平. 變面積電容式雙模態優化的音叉式微機械陀螺[P]. CN105352488A,2016-02-24.

[15]劉海鵬,高世橋,張廣義,武麗森,譚楊康,王子文,王學敏. 一種基于能量采集電路的壓電-電磁復合式俘能器[P]. CN105162357A,2015-12-16.

[16]張廣義,高世橋,劉海鵬,武麗森,董新博,陳林雄. 一種壓電-電磁復合式俘能器[P]. CN105141181A,2015-12-09.

[17]劉海鵬,武麗森,高世橋,張廣義,譚楊康,王子文,王學敏,邱士起. 一種用于壓電-電磁復合式俘能器的能量采集電路[P]. CN105099272A,2015-11-25.

[18]劉海鵬,高世橋,張廣義,武麗森,李平. 一種壓電-電磁復合式低頻寬帶俘能器[P]. CN104836478A,2015-08-12.

[19]劉宗寶,高世橋,牛少華,劉海鵬,管延偉. 一種侵徹過載信息實時處理半實物仿真系統[P]. CN104698866A,2015-06-10.

[20]王彩鋒,牛少華,高世橋,劉海鵬,王華敏. 基于測力板的人致載荷測試系統[P]. CN103954393A,2014-07-30.

[21]高世橋,李平,金磊,劉海鵬,牛少華,姚峰林. 基于MEMS技術的壓電-電磁復合式寬頻俘能器[P]. CN103199738A,2013-07-10.

[22]李平,高世橋,金磊,牛少華,劉海鵬,姚峰林. 基于MEMS的動磁鐵型電磁-壓電復合式寬頻俘能器[P]. CN103107739A,2013-05-15.

[23]姚峰林,高世橋,劉海鵬,牛少華,李平. 一種多懸臂寬頻MEMS壓電俘能器[P]. CN102931878A,2013-02-13.

[24]高世橋,梁新建,劉海鵬. 全順向電容式微機械陀螺[P]. CN102042829A,2011-05-04.

發明授權：

[1]郭勝凱,高世橋,金磊,尹作宗,李澤章. 一種升頻式壓電-電磁俘能裝置[P]. CN111628674B,2022-03-18.

[2]李澤章,高世橋,彭世剛,劉海鵬,金磊. 一種基于杠桿效應位移放大音叉式微機械陀螺儀[P]. CN110307832B,2021-04-09.

[3]劉峰,高世橋,郭建昌,牛少華. 一種復合梁結構的壓阻式MEMS加速度傳感器及封裝裝置[P]. CN109231155B,2020-07-07.

[4]劉海鵬,高世橋,金磊,周瀟雅,路俊虎. 一種基于汽車振動的俘能裝置[P]. CN107465324B,2020-05-08.

[5]高世橋,閆麗,金磊,張希洋,張廣義. 一種多自由度上變頻復合式振動俘能器及其應用[P]. CN108683359B,2019-10-15.

[6]劉海鵬,武麗森,高世橋,張廣義,譚楊康,王子文,王學敏,邱士起. 一種用于壓電-電磁復合式俘能器的能量采集電路[P]. CN105099272B,2018-05-15.

[7]董新博,劉海鵬,高世橋,張廣義,陳林雄. 一種小型電磁擺動式俘能器[P]. CN105703598B,2018-04-10.

[8]張廣義,高世橋,劉海鵬,武麗森,董新博,陳林雄. 一種壓電-電磁復合式俘能器[P]. CN105141181B,2018-02-02.

[9]劉海鵬,高世橋,張廣義,武麗森,譚楊康,王子文,王學敏. 一種基于能量采集電路的壓電-電磁復合式俘能器[P]. CN105162357B,2017-12-26.

[10]劉宗寶,高世橋,牛少華,劉海鵬,管延偉. 一種侵徹過載信息實時處理半實物仿真系統[P]. CN104698866B,2017-10-24.

[11]劉海鵬,高世橋,張廣義,武麗森,李平. 一種壓電-電磁復合式低頻寬帶俘能器[P]. CN104836478B,2017-06-20.

[12]王彩鋒,牛少華,高世橋,劉海鵬,王華敏. 基于測力板的人致載荷測試系統[P]. CN103954393B,2016-02-10.

[13]高世橋,李平,金磊,劉海鵬,牛少華,姚峰林. 基于MEMS技術的壓電-電磁復合式寬頻俘能器[P]. CN103199738B,2015-07-15.

[14]李平,高世橋,金磊,牛少華,劉海鵬,姚峰林. 基于MEMS的動磁鐵型電磁-壓電復合式寬頻俘能器[P]. CN103107739B,2015-04-15.

[15]姚峰林,高世橋,劉海鵬,牛少華,李平. 一種多懸臂寬頻MEMS壓電俘能器[P]. CN102931878B,2015-01-21.

[16]高世橋,梁新建,劉海鵬. 全順向電容式微機械陀螺[P]. CN102042829B,2012-06-20.

實用新型：

[1]姚峰林,高世橋,劉海鵬,牛少華,李平. 一種多懸臂寬頻MEMS壓電俘能器[P]. CN203278696U,2013-11-06.

論文專著：

出版專著：

1、《微振動俘能技術》，高世橋; 劉海鵬; 金磊; 牛少華，.中國科學技術出版社, 2016.。

2、《混凝土侵徹力學》，高世橋，.中國科學技術出版社, 2013。

3、《微機電系統力學》，高世橋，劉海鵬著國防工業出版社，2008

4、《毛細力學》，高世橋，劉海鵬著，科學出版社, 2010

發表部分英文論文：

[1]Yin, Zuozong; Gao, Shiqiao*; Jin, Lei; Sun, Yaoqiang; Wu, Qinghe; Zhang, Xiyang; Guo, Shengkai. A dual impact driven frequency up-conversion piezoelectric energy harvester for ultralow-frequency and wide-bandwidth operation.Sensors and Actuators A: Physical , 2021, 331: 112961.

[2]Yin, Zuozong; Gao, Shiqiao*; Jin, Lei; Guo, Shengkai; Wu, Qinghe; Li, Zezhang. A shoe-mounted frequency up-converted piezoelectric energy harvester.Sensors and Actuators A: Physical , 2021, 318: 112530.

[3]Li, Zezhang; Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Niu, Shaohua. Micromachined Vibrating Ring Gyroscope Architecture with High-Linearity, Low Quadrature Error and Improved Mode Ordering. Sensors, 2020, 20(15): 4327.

[4]Jin, Lei; Gao, Shiqiao; Zhang, Xiyang; Wu, Qinghe.Output of MEMS Piezoelectric Energy Harvester of Double-Clamped Beams with Different Width Shapes.Materials, 2020, 13(10): 2330.

[5]Xiao, Lijun; Li, Shi; Song, Weidong*; Xu, Xiao; Gao, Shiqiao. Process-induced geometric defect sensitivity of Ti-6Al-4V lattice structures with different mesoscopic topologies fabricated by electron beam melting. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 778: 139092.

[6]Jin, Lei; Gao, Shiqiao*; Zhang, Xiyang.The effect of the beam shapes on the doubly-clamped piezoelectric energy harvester.Applied Mathematics and Mechanics (English Edition ), 2019, 40(9): 1361-1374.

[7]Li, Zezhang; Gao, Shiqiao*; Jin, Lei; Liu, Haipeng; Guan, Yanwei; Peng, Shigang. Design and Mechanical Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Leverage Mechanism.Sensors, 2019, 19(16): 3455.

[8]Zhang Guangyi*; Gao Shiqiao; Liu Haipeng; Zhang Wenwu. Design and performance of hybrid piezoelectric-electromagnetic energy harvester with trapezoidal beam and magnet sleeve.Journal of Applied Physics, 2019, 125(8): 084101.

[9]Xu Xiao; Gao Shiqiao; Zhang Dongmei; Niu Shaohua*; Jin Lei; Ou Zhuocheng. Mechanical behavior of liquid nitrile rubber-modified epoxy resin: Experiments, constitutive model and application.International Journal of Mechanical Sciences, 2019, 151: 46-60.

[10]Zhou, Xiaoya; Gao, Shiqiao*; Jin, Lei; Liu, Haipeng; Li, Ping.Effects of changing PZT length on the performance of doubly-clamped piezoelectric energy harvester with different beam shapes under stochastic excitation. Microsystem Technologies, 2018, 24(9): 3799-3813.

[11]Xu, Xiao*; Gao, Shiqiao; Ou, Zhuocheng; Ye, Haifu.Mechanical Behavior of Liquid Nitrile Rubber-Modified Epoxy Resin under Static and Dynamic Loadings: Experimental and Constitutive Analysis.Materials, 2018, 11(9): 1565.

[12]Cui, Yan*; Yu, Menglin; Gao, Shiqiao; Kong, Xiangxin; Gu, Wang; Zhang, Ran; Liu, Bowen.Fabrication and characterization of a piezoelectric energy harvester with clamped-clamped beams.AIP Advances, 2018, 8(5): 055028.

[13]Zhang Xiyang; Gao Shiqiao; Li Dongguang; Jin Lei; Wu Qinghe; Liu Feng.Frequency up-converted piezoelectric energy harvester for ultralow-frequency and ultrawide-frequency-range operation.Applied Physics Letters, 2018, 112(16): 163902.

[14]Zhou Xiaoya; Gao Shiqiao*; Liu Haipeng; Jin Lei. Nonlinear Hybrid Piezoelectric and Electromagnetic Energy Harvesting Driven by Colored Excitation.Energies, 2018, 11(3): 498.

[15]Li Ping*; Gao Shiqiao; Cong Binglong.Theoretical modeling, simulation and experimental study of hybrid piezoelectric and electromagnetic energy harvester.AIP Advances, 2018, 8(3): 035017.

[16]Liu, Feng*; Gao, Shiqiao; Niu, Shaohua; Zhang, Yan; Guan, Yanwei; Gao, Chunhui; Li, Ping. Optimal design of high-g MEMS piezoresistive accelerometer based on Timoshenko beam theory.Microsystem Technologies, 2018, 24(2): 855-867.

[17]Li, Ping*; Gao, Shiqiao; Zhou, Xiaoya; Liu, Haipeng. On the performances of a nonlinear hybrid piezoelectric and electromagnetic energy harvester.Microsystem Technologies, 2018, 24(2): 1017-1024.

[18]Zhang, Dongmei*; Gao, Shiqiao; Niu, Shaohua; Liu, Haipeng.A PREDICTION METHOD FOR LOAD DISTRIBUTION IN THREADED CONNECTIONS.Journal of Theoretical and Applied Mechanics, 2018, 56(1): 157-168.

[19]Zhang, Dongmei*; Gao, Shiqiao; Liu, Haipeng; Liu, Zongbao; Niu, Shaohua. Real-time numerical calculation for penetration depth of projectiles into concrete targets.Mechanics Based Design of Structures and Machines, 2018, 46(4): 520-531.

[20]Gao Chunhui*; Gao Shiqiao; Liu Haipeng; Jin Lei; Lu Junhu; Li Ping. Optimization for output power and band width in out-of-plane vibration energy harvesters employing electrets theoretically, numerically and experimentally.Microsystem Technologies, 2017, 23(12): 5759-5769.

[21]Li Ping*; Gao Shiqiao; Zhou Xiaoya; Liu Haipeng; Shi Jitao. Analytical modeling, simulation and experimental study for nonlinear hybrid piezoelectric-electromagnetic energy harvesting from stochastic excitation.Microsystem Technologies, 2017, 23(12): 5281-5292.

[22]Jin, Lei; Gao, Shiqiao*; Zhou, Xiaoya; Zhang, Guangyi.The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23(10): 4805-4814.

[23]Gao Chunhui; Gao Shiqiao; Liu Haipeng*; Jin Lei; Lu Junhu. Electret Length Optimization of Output Power for Double-End Fixed Beam Out-of-Plane Electret-Based Vibration Energy Harvesters.Energies, 2017, 10(8): 1122.

[24]Zhang, Guangyi*; Gao, Shiqiao; Liu, Haipeng; Niu, Shaohua. A low frequency piezoelectric energy harvester with trapezoidal cantilever beam: theory and experiment.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23(8): 3457-3466.

[25]Zhang Dongmei*; Gao Shiqiao; Niu Shaohua; Liu Haipeng. Study on collision of threaded connection during impact. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 106: 133-145.

[26]Yao, Fenglin*; Meng, Wenjun*; Gao, Shiqiao; Zhao, Jie; She, Zhanjiao; Yin, Hang.Research on the master-slave compound multi-cantilever piezoelectric energy harvester.Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems, 2017, 23(4): 1027-1044.

[27]Shiqiao Gao; Guangyi Zhang; Lei Jin; Ping Li; Haipeng Liu. Study on characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams. Microsystem Technologies, 2017, 6., ISSN 0946-7076.

[28]Zhou Xiaoya; Gao Shiqiao; Liu Haipeng*; Guan Yanwei. Effects of introducing nonlinear components for a random excited hybrid energy harvester.Smart Materials and Structures, 2017, 26(1): 015008.

[29]Lei Jin; Shiqiao Gao; Xiaoya Zhou; Guangyi Zhang.The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output.Microsystem Technologies, 2016, 10.

[30]Dongmei Zhang; Shiqiao Gao; Xiao Xu.A new computational method for threaded connection stiffness.Advances in Mechanical Engineering, 2016, 8(2): 1-9.

[31]Zhang, Guangyi*; Gao, Shiqiao; Liu, Haipeng.A utility piezoelectric energy harvester with low frequency and high-output voltage: Theoretical model, experimental verification and energy storage.AIP Advances, 2016, 6(9): 095208.

[32]Li, Changlong; Gao, Shiqiao; Niu, Shaohua*; Liu, Haipeng.Study of Intrinsic Dissipation Due to Thermoelastic Coupling in Gyroscope Resonators.Sensors, 2016, 16(9): 1445.

[33]Niu, Shaohua*; Wang, Caifeng; Gao, Shiqiao.A novel crowd random loads model for pedestrians walking on footbridge. Archive of Applied Mechanics, 2016, 86(7): 1369-1381.

[34]Guan, Yanwei; Gao, Shiqiao; Liu, Haipeng*; Jin, Lei; Zhang, Yaping.Vibration Sensitivity Reduction of Micromachined Tuning Fork Gyroscopes through Stiffness Match Method with Negative Electrostatic Spring Effect. Sensors, 2016, 16(7): 1146.

[35]Li, Changlong; Gao, Shiqiao; Niu, Shaohua*; Liu, Haipeng.Thermoelastic coupling effect analysis for gyroscope resonator from longitudinal and flexural vibrations.Microsystem Technologies, 2016, 22(5): 1029-1042.

[36]Guan, Yanwei; Gao, Shiqiao; Liu, Haipeng*; Jin, Lei; Niu, Shaohua.Design and Vibration Sensitivity Analysis of a MEMS Tuning Fork Gyroscope with an Anchored Diamond Coupling Mechanism.Sensors, 2016, 16(4): 468.

[37]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Wu, Lisen.Theoretical analysis and experimental study for nonlinear hybrid piezoelectric and electromagnetic energy harvester.Microsystem Technologies, 2016, 22(4): 727-739.

[38]Guan, Yanwei*; Gao, Shiqiao; Jin, Lei; Cao, Lianmin.Design and vibration sensitivity of a MEMS tuning fork gyroscope with anchored coupling mechanism.Microsystem Technologies, 2016, 22(2): 247-254.

[39]Guan, Yanwei*; Gao, Shiqiao; Liu, Haipeng; Niu, Shaohua.Acceleration sensitivity of tuning fork gyroscopes: theoretical model, simulation and experimental verification.Microsystem Technologies, 2015, 21(6): 1313-1323.

[40]Hai Peng, Liu; Shi Qiao, Gao; Lei, Jin.Study on the Energy Harvesting Performance of PE Cantilever Beam.Key Engineering Materials, 2015, 645-646: 1189-1194.

[41]Cui, Yan*; Zhang, Qunying; Yao, Minglei; Dong, Weijie; Gao, Shiqiao.Vibration piezoelectric energy harvester with multi-beam.AIP Advances, 2015, 5(4): 041332.

[42]Li, Ping*; Gao, Shiqiao; Cai, Huatong.Modeling and analysis of hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.Microsystem Technologies, 2015, 21(2): 401-414.

[43]Cai, Huatong; Gao, Shiqiao; Li, Ping; Wang, Huamin.Design and experimental study of hybrid piezoelectric and electromagnetic harvester.Piezoelectrics & Acoustooptics, 2015, 37(2): 248.

[44]Li, Ping; Gao, Shiqiao; Cai, Huatong; Cui, Yan; Li, P.*.Design, fabrication and performances of MEMS piezoelectric energy harvester.International Journal of Applied Electromagnetics and Mechanics, 2015, 47(1): 125-139.

[45]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Cui, Yan.Design, fabrication and performances of MEMS piezoelectric energy harvester.International Journal of Applied Electromagnetics and Mechanics, 2015, 47(1): 125-139.

[46]Zongbao Liu; Shiqiao Gao; Haipeng Liu; Dongmei Zhang; Lei He.Nonlinear adaptive noise-induced algorithm and its application in penetration signal.Measurement, 2014, 58: 556-565.

[47]Yao Fenglin; Gao Shiqiao; Zhao Jie; Liu Haipeng; Niu Shaohua; Jin Lei.Two-stage decoupled micro-machined gyroscope and noncontact vibration test.Proceedings of the Institution of Mechanical Engineers - Part N: Journal of Nanoengineering and Nanosystems , 2014, 228(3): 139-145.

[48]Li, Ping*; Gao, Shiqiao; Cai, Huatong; Wang, Huamin.Coupling effect analysis for hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.International Journal of Precision Engineering and Manufacturing, 2014, 15(9): 1915-1924.

[49]Li, Ping*; Gao, Shiqiao; Niu, Shaohua; Liu, Haipeng; Cai, Huatong.An analysis of the coupling effect for a hybrid piezoelectric and electromagnetic energy harvester.Smart Materials and Structures, 2014, 23(6): 065016.

[50]Xing Hui Chen; Shi Qiao Gao.An Elevation Cosine Derivation Based Updating STAP Method for Non-Sidelooking Uniform Linear Array.Applied Mechanics and Materials, 2014, 556-562: 3662-3665.

[51]Xing Hui Chen; Shi Qiao Gao.A Space Time Autoaggressive Method Based on Parameters Estimation for Airborne MIMO Radar.Applied Mechanics and Materials, 2014, 556-562: 4496-4500.

[52]Xing Hui Chen; Shi Qiao Gao.Joint Doa-Frequency Estimation for Coherent Signal Identification.Applied Mechanics and Materials, 2014, 556-562: 4875-4879.

[53]Liu, Haipeng; Gao, Shiqiao; Zhou, Yong; Jin, Lei; He, Yunli; Liu, H.*.Optical measurement and analysis of dynamic characteristics of micro-comb structure.Nanotechnology and Precision Engineering, 2014, 12(1): 22-26.

[54]Li, Ping*; Gao, Shiqiao; Liu, Haipeng; Liu, Jun; Shi, Yunbo.Effects of package on the performance of MEMS piezoresistive accelerometers.MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2013, 19(8): 1137-1144.

[55]Fenglin Yao*; Shiqiao Gao; Jie Zhao; Haipeng Liu; Shaohua Niu; Lei Jin; Oukil Souad; Boudjemai Abdelmadjid; Boughanmi Nabil.The vibration and measurement of driving mode of the two-stage decoupled micro-machined gyroscope.International Journal on Smart Sensing and Intelligent Systems, 2013, 6(4): 1599-1616.

[56]Liu, Haipeng; Gao, Shiqiao; Jin, Lei; Liu, H.-P.*.Numerical simulation and experiment on penetration of projectile into multi-layer concrete target.Acta Armamentarii, 2013, 34(SUPPL.1): 68-72.

[57]Niu, Shaohua; Gao, Shiqiao; Wang, Dong; Kasperski, Michael; Agu, Ecevit; Niu, S.-H.*.Dynamic characteristics of the coupled system of footbridge and human.Journal of Beijing Institute of Technology, 2013, 22(3): 285-290.

[58]Zhang, Dong-Mei*; Gao, Shi-Qiao; Liu, Hai-Peng.Theory and applications of segment wavelet filtering.Transactions of Beijing Institute of Technology, 2013, 33(SUPPL.2): 117-120.

[59]Niu, Shaohua; Gao, Shiqiao; Jin, Lei; Niu, S.-H.*.A model based on acceleration for calculation of projectile penetration depth.Acta Armamentarii, 2012, 33(SUPPL2): 225-229.

[60]Liu, Haipeng*; Gao, Shiqiao; Shen, Li; Jin, Lei.Simulation and experiment of the oblique penetration of projectile into concrete target.Acta Armamentarii, 2012, 33(SUPPL2): 257-260.

[61]Li, Ping; Gao, Shiqiao; Jin, Lei; Shi, Yunbo; Li, P.*.Effects of package materials on performances of a piezoresistive MEMS accelerometer.Explosion and Shock Waves, 2012, 32(6): 623-628.

[62]Gao S, Niu S, Jin L ,Micro Size Effect of Silicon Material on the Performance of Micro-Gyroscope. Advanced Science Letters,2012;178-181

[63]Zhou, Yong*; Sun, Haigang; Gao, Shiqiao; Niu, Shaohua.Videometrics-based Detection of Vibration Linearity in MEMS Gyroscope.International Journal of Computational Intelligence Systems, 2011, 4(3): 321-328.

[64]Liu, Haipeng*; Gao, Shiqiao; Niu, Shaohua; Jin, Lei.Analysis on the adhesion of micro-comb structure in MEMS.International Journal of Applied Electromagnetics and Mechanics, 2010, 33(3-4): 979-984.

[65]Xin Jian, Liang; S Q , Gao.A MEMS Capacitive Gyroscope with Improved Reliability.Materials Science Forum, 2009, 628-629: 341-346.

[65]Gao, Shiqiao.A fuzzy model of the penetration resistance ofconcrete targets.International Journal of Impact Engineering, , 2009, 36(4):644-649

[66]Gao Shi-qiao; Jin Lei; Kasperski, M.; Liu Hai-peng; Li Ming-hui.Nonlinear analysis of a structure loaded by a stochastic excitation.Applied Mathematics and Mechanics (English Edition ), 2007, 28(11): 1479-1485.

[67]Shiqiao Gao; Haipeng Liu; Keijie Li; Huang, FL; Jin, L.Normal expansion theory for penetration of projectile against concrete target.Applied Mathematics and Mechanics (English Edition ), 2006, 27(4): 485-492.

[68]Gao Shiqiao; Jin Lei; Liu Haipeng.Dynamic response of a projectile perforating multi-plateconcrete targets.International Journal of Solids and Structures, 2004, 41(18-19): 4927-4938.

[69]高世橋 王寶興DYNAMICAL CALCULATION AND ANALYSIS ON PENETRATION OF TARGET PLATES BY TRUNCATED CONICAL PROJECTILES 《Applied Mathematics and Mechanics》(English Edition) 1986年第11期

發表中文期刊論文：

[1]郭松林,高世橋,李澤章,李云彪.彈引系統攻角侵徹混凝土仿真與試驗研究[J].兵器裝備工程學報,2022,43(01):135-139+205.

[2]張冬梅,高世橋.侵徹過程中彈引螺紋連接結構振動特性研究[J].爆炸與沖擊,2022,42(03):66-77.

[3]付德義,高世橋,孔令行,賈海坤.基于相關向量信息熵的風電機組功率曲線構建方法研究[J].太陽能學報,2022,43(05):252-259.

[4]張冬梅,高世橋,李世中.侵徹過程中彈引系統的沖擊傳遞特性研究[J].兵器裝備工程學報,2020,41(12):27-34.

[5]戴政豪,高世橋,李澤章,張銥翔.基于包絡預測的動態閾值計層算法[J].兵器裝備工程學報,2020,41(12):53-56.

[6]徐蕭,金磊,黃莎玲,高世橋,張虎生.飛片沖擊載荷在環氧樹脂/印刷電路板/環氧樹脂界面處的傳遞特性[J].兵工學報,2020,41(09):1817-1825.

[7]彭世剛,劉海鵬,高世橋,金磊,李澤章.杠桿耦合式微機械陀螺儀特性分析[J].壓電與聲光,2020,42(01):118-122.

[8]高世橋,閆麗,金磊,張希洋,張廣義.非線性雙端固支梯形梁壓電俘能器結構設計與特性分析[J].農業機械學報,2019,50(07):398-405.

[9]劉峰,高世橋,牛少華,劉海鵬,肖東岳,楊旭.基于Jacobian矩陣的牛頓迭代法惠斯通電橋調零[J].傳感技術學報,2019,32(01):96-99.

[10]閆麗,高世橋,劉海鵬,張廣義.雙端固支式壓電俘能器的特性研究[J].壓電與聲光,2018,40(03):370-373+378.

[11]張廣義,金磊,高世橋,劉海鵬,牛少華.雙端固支梯形梁壓電俘能器機電耦合模型與試驗分析[J].北京理工大學學報,2018,38(06):600-605.

[12]路俊虎,金磊,高世橋,高春暉,呂慶山,劉海鵬.基于駐極體靜電俘能器的優化設計與實驗測試[J].工程科學學報,2018,40(04):492-499.

[13]李長龍,高世橋,牛少華,劉海鵬.高沖擊下引信用固態鉭電容的參數變化[J].爆炸與沖擊,2018,38(02):419-425.

[14]王彩鋒,高世橋,牛少華,劉海鵬.行人SMD模型參數對人群-結構耦合動力特性的影響[J].振動與沖擊,2018,37(03):91-97.

[15]董新博,劉海鵬,陳林雄,高世橋.雙端磁耦合式壓電振動俘能器結構設計[J].壓電與聲光,2017,39(05):711-716.

[16]劉峰,張丹,熊磊,朱清慧,高世橋.基于神經元的瓦楞橫切機實時控制系統設計[J].電機與控制應用,2017,44(10):19-24.

[17]徐蕭,高世橋,牛少華,申麗,劉海鵬,歐卓成.灌封材料對侵徹過載下彈載器件的防護分析[J].兵工學報,2017,38(07):1289-1300.

[18]陳林雄,高世橋,董新博.基于材料疲勞的壓電俘能器結構設計[J].壓電與聲光,2017,39(04):539-543.

[19]高春暉,高世橋,金磊,劉海鵬,牛少華.微機械結構中考慮邊界滑移的穿孔平板壓膜阻尼分析[J].北京理工大學學報,2017,37(06):562-566.

[20]張廣義,高世橋,劉海鵬,李平,牛少華.一種低頻壓電俘能器準靜態分析與能量收集試驗[J].北京理工大學學報,2017,37(06):656-660.

[21]張冬梅,高世橋,劉海鵬,牛少華.基于加速度測試及模糊模型的彈丸侵徹混凝土深度實時預測方法[J].振動與沖擊,2017,36(05):176-181+245.

[22]李長龍,高世橋,牛少華,劉海鵬.微諧振器縱向振動熱彈性耦合分析[J].北京理工大學學報,2016,36(12):1237-1242.

[23]王彩鋒,高世橋,劉海鵬,武麗森.壓電-電磁復合式俘能器設計及能量收集測試[J].壓電與聲光,2016,38(06):902-905.

[24]李長龍,高世橋,牛少華,劉海鵬.高沖擊環境對引信用儲能電容性能的影響[J].兵工學報,2016,37(S2):16-22.

[25]邱士起,牛少華,高世橋.沖擊載荷下石英晶體振蕩器失效機理分析[J].兵工學報,2016,37(S2):96-100.

[26]劉宗寶,高世橋,牛少華,劉海鵬,管延偉.侵徹起爆控制系統的過載信息實時采集處理與侵深識別技術[J].北京理工大學學報,2016,36(10):1025-1030.

[27]譚楊康,高世橋,張廣義.梯形梁壓電俘能器的特性研究[J].壓電與聲光,2016,38(04):579-583.

[28]王彩鋒,高世橋,譚楊康.基于人行通道測試系統的單人步行載荷建模[J].振動與沖擊,2016,35(12):136-140.

[29]張冬梅,高世橋,牛少華.侵徹過程中螺紋連接結構的應力傳遞仿真分析[J].兵工學報,2015,36(S1):284-288.

[30]牛少華,王華敏,高世橋.人行橋隨機行人載荷特性數值仿真研究[J].兵工學報,2015,36(S1):385-390.

[31]蔡華通,高世橋,李平,王華敏.壓電-電磁復合式俘能器的設計與實驗研究[J].壓電與聲光,2015,37(02):248-253+257.

[32]王華敏,牛少華,高世橋.單人步行荷載作用下多跨橋梁的動態特性分析[J].鋼結構,2015,30(02):16-21.

[33]王彩鋒,高世橋,金磊.Dynamic test methods for natural frequency of footbridge[J].Journal of Measurement Science and Instrumentation,2013,4(03):218-222.

[34]張冬梅; 高世橋; 牛少華.侵徹過程中螺紋連接結構的應力傳遞仿真分析.兵工學報, 2014, 36: 284-288.

[35]劉海鵬,高世橋,周勇,金磊,何運麗.微梳齒結構動態特性參量的光學測量與分析(英文)[J].納米技術與精密工程,2014,12(01):22-26.

[36]姚峰林,高世橋,劉宗寶,劉海鵬,申麗.硬目標侵徹引信半實物系統測試[J].彈箭與制導學報,2013,33(03):52-55.

[37]張冬梅; 高世橋; 劉海鵬.分段小波濾波原理及應用.北京理工大學學報, 2013, 33: 117-120.

[38]高世橋,王棟,牛少華.人-結構耦合系統動態特性分析[J].北京理工大學學報,2013,33(03):235-238.

[39]李平,高世橋,金磊,石云波.封裝材料對壓阻式加速度傳感器性能的影響[J].爆炸與沖擊,2012,32(06):623-628.

[40]申麗,高世橋,金磊.彈體斜侵徹混凝土仿真分析[J].彈箭與制導學報,2012,32(06):61-64.

[41]周勇,孫海剛,高世橋.基于視覺測量的微陀螺振動系統線性度測試研究[J].北京理工大學學報,2012,32(08):790-794+837.

[42]姚峰林,高世橋,趙婕,高崇仁.Vibration test of micro machined gyroscope based on high speed photography and SURF[J].Journal of Beijing Institute of Technology,2012,21(02):179-184.

[43]姚峰林,高世橋.基于高速攝影動態測試微陀螺振動[J].光學精密工程,2012,20(01):165-170.

[44]姚峰林,高世橋,高崇仁.基于視頻的塔式起重機振動測試[J].起重運輸機械,2011(12):72-75.

[45]姚峰林,高世橋.微陀螺梳齒靜電驅動力的計算方法[J].傳感技術學報,2011,24(09):1265-1269.

[46]杜井慶,高世橋,羅創,姚峰林,劉海鵬.基于PID算法的控制量按任意函數變化的一種控制方法[J].儀器儀表學報,2011,32(06):1317-1323.

[47]劉海鵬,高世橋,金磊.彈丸貫穿有限厚混凝土靶板實驗與仿真分析[J].兵工學報,2010,31(S1):59-63.

[48]劉海鵬,高世橋,金磊,郭雅君.彈侵徹混凝土靶面成坑的分階段分析[J].兵工學報,2009,30(S2):52-56.

[49]李明輝,高世橋,劉海鵬,梁新建.Computation of Capacitance for MEMS Comb-Drive Structures[J].Journal of Beijing Institute of Technology,2009,18(01):1-5.

[50]劉海鵬,高世橋,金磊.3D Numerical Simulation of Projectile Penetration into Concrete Target[J].Journal of Beijing Institute of Technology,2008,17(04):379-383.

[51]高世橋,金磊,M.卡斯巴斯基,劉海鵬,李明輝.隨機激勵下結構的非線性分析[J].應用數學和力學,2007(11):1318-1324.

[52]劉鵬,高世橋,劉海鵬,李明輝.基于RACE++構架的嵌入式信號處理機[J].探測與控制學報,2007(S1):12-15+20.

[53]韓麗,高世橋.混凝土靶體尺寸對過載影響的數值研究[J].計算機仿真,2007(06):17-19+26.

[54]劉鵬,高世橋,劉海鵬,李明輝.基于MicroTCA構架的導航信號處理機[J].彈箭與制導學報,2007(02):242-244.

[55]韓麗,高世橋,李明輝,劉海鵬.彈丸垂直貫穿混凝土靶的數值研究[J].北京理工大學學報,2006(11):953-956.

[56]李明輝,高世橋.隨機激勵下結構的非線性分析[J].戰術導彈技術,2006(05):34-38+43.

[57]曲大成,高世橋,劉玉樹.分布式微機電系統的多主體控制[J].電子科技大學學報,2006(03):367-370.

[58]韓麗,高世橋,李明輝,劉海鵬.基于侵深公式的彈沖擊混凝土目標的計算方法[J].北京理工大學學報,2006(05):393-396.

[59]韓麗,高世橋,李明輝,劉海鵬.彈侵徹半無限厚混凝土靶解析計算方法[J].彈箭與制導學報,2006(SA):1138-1139.

[60]曲大成,高茵,高世橋.高校投入產出效益與內部控制[J].北京理工大學學報(社會科學版),2006(02):113-117.

[61]高世橋,劉海鵬,李科杰,黃風雷,金磊.彈侵徹混凝土靶的法向膨脹理論[J].應用數學和力學,2006(04):431-438.

[62]高世橋,曲大成.高等學校投資效益的評價體系探討[J].北京理工大學學報(社會科學版),2005(03):80-83.

[63]劉海鵬,高世橋.彈侵徹半無限厚混凝土靶的實驗與分析[J].彈箭與制導學報,2005(S2):336-338+341.

[64]高世橋,曲大成.微機電系統(MEMS)技術的研究與應用[J].科技導報,2004(04):17-21.

[65]周勇,蘇偉,高世橋.引信與火控系統的適配性分析[J].北京理工大學學報,2004(01):53-56.

[66]高世橋 ,金磊 ,劉海鵬.INVESTIGATION OF RANDOM RESPONSE OF ROTATIONALSHELL WHEN CONSIDERING GEOMETRICNONLINEAR BEHAVIOUR[J].Applied Mathematics and Mechanics(English Edition),2001(11):1268-1272.

[67]高世橋,金磊,H.J.尼曼,劉海鵬.考慮旋轉殼幾何非線性時的隨機響應研究[J].應用數學和力學,2001(11):1142-1146.

[68]高世橋.引信模塊化設計研究[J].兵工學報,2001(02):185-188.

[69]高世橋,Niemann H J.幾何非線性對旋轉殼隨機響應的影響(英文)[J].Journal of Beijing Institute of Technology(English Edition),2001(01):23-28.

[70]高世橋,Niemann H J.受平穩強風載作用時旋轉殼的非線性隨機響應(英文)[J].Journal of Beijing Institute of Technology(English Edition),2001(01):29-33.

[71]金磊,高世橋,李文杰.MEMS固態引信硅微結構的力學分析與設計[J].兵工學報,2000(S1):45-46.

[72]李文杰,金磊,高世橋.用VC實現PC機對激光儀的通信控制[J].兵工自動化,2000(02):17-20.

[73]金磊,高世橋,李文杰.微加速度傳感器硅微結構設計[J].傳感器技術,2000(02):23-25.DOI:10.13873/j.1000-97872000.02.010.

[74]李文杰,金磊,高世橋.MEMS固態引信核心子系統的設計[J].探測與控制學報,2000(01):61-64.

[75]李文杰,賈云得,高世橋.立體視覺系統攝象機標定自動化[J].兵工自動化,2000(01):13-17.

[76]李志祥,龐海芍,高世橋.發揮經濟核算在高校管理中的地位與作用[J].北京高等教育,1998(06):47-48.

[77]高世橋,尼曼ＨＪ,曲克波.考慮非線性時旋轉殼的隨機響應分析[J].Journal of Beijing Institute of Technology(English Edition),1997(02):180-186.

[78]高世橋,臧巖,譚惠民.引信典型支承板受沖擊載荷作用時的非線性動力分析[J].北京理工大學學報,1996(04):395-400.

[79]高世橋,劉明杰,譚惠民.侵徹彈傾斜侵徹半無限混凝土目標時的動力分析[J].兵工學報,1995(04):46-50.

[80]高世橋,石庚辰,譚惠民,郭昭平.彈引系統以極大著角碰擊半無限目標時的動力分析[J].北京理工大學學報,1994(04):359-365.

[81]高世橋,曲克波.彈-引系統以極大著角碰擊薄靶板的動力學研究[J].兵工學報,1994(03):85-89.

[82]高世橋.具有物理非線性旋轉殼的隨機動力響應[J].Journal of Beijing Institute of Technology(English Edition),1994(01):25+19-25.

[83]高世橋,王寶興.具有薄弱環節引信貫穿靶板時的動力分析[J].兵工學報,1991(02):93-96.

[84]高世橋 ,譚惠民 ,馬寶華.引信安全系統的內稟理論[J].現代引信,1991(03):1-7.

[85]高世橋.有子午向隨機缺陷旋轉殼的隨機響應研究[J].北京理工大學學報,1991(01):25-32.

[86]譚惠民,高世橋.圓柱殼受軸向沖擊作用時的塑性動態屈曲研究[J].北京理工大學學報,1990(03):98-102.

[87]DOUG F.BRAUN,高世橋.電子保險和解除保險(裝置)安全性設計和試驗方法[J].現代引信,1989(04):19-23+40.

[88]Ken Willis ,高世橋.實現并驗證電子保險/解除保險裝置的方法[J].現代引信,1989(04):24-26.

[89]高世橋.國際合作專門小組會NUNN計劃修正稿[J].現代引信,1989(04):46-50.

[90]高世橋 ,石巖.引信性能指標的綜合評判[J].現代引信,1989(02):37-39+27.

[91]高世橋,盧文達.具有隨機幾何缺陷旋轉殼的陣風響應分析[J].北京理工大學學報,1989(01):61-66.

[92]高世橋,盧文達.解決諧波間耦合動力問題的攝動法[J].應用數學和力學,1988(11):975-980.

[93]高世橋 ,盧文達.PERTURBATION METHOD TO SOLVE THE COUPLE PROBLEM AMONG HARMONIC WAVES[J].Applied Mathematics and Mechanics(English Edition),1988(11):1039-1044.

[94]高世橋,盧文達.具有非軸對稱缺陷雙曲冷卻塔的動力有限元解[J].應用數學和力學,1988(06):475-480.

[95]高世橋 ,盧文達.DYNAMIC SOLUTION OF HYPERBOLIC COOLING TOWER WITH NONSYMMETRIC IMPERFECTIONS BY FINITE ELEMENT METHOD[J].Applied Mathematics and Mechanics(English Edition),1988(06):515-519.

[96]高世橋.具有軸對稱幾何缺陷圓柱殼的靜力分析[J].力學與實踐,1987(S1):24-28.

[97]高世橋.具有緩變軸對稱幾何缺陷圓柱殼的頻率分析[J].應用力學學報,1987(04):97-101+131.

[98]盧文達,高世橋.旋轉殼局部幾何缺陷對其頻率和振型的影響[J].應用數學和力學,1987(11):953-958.

[99]盧文達,高世橋.THE EFFECT LOCAL GEOMETRIC IMPERFECTIONS OF ROTATIONAL SHELL ON ITS NATURAL FREQUENCIES AND MODELS[J].Applied Mathematics and Mechanics(English Edition),1987(11):1013-1018.

[100]盧文達,高世橋.旋轉殼局部幾何缺陷對其系統固有頻率的影響[J].上海力學,1987(03):1-12.

[101]高世橋,王寶興.截錐形彈低中速貫穿薄靶板時的動力分析與計算[J].應用數學和力學,1986(11):1033-1038.

[102]王寶興,高世橋.引信著靶時的動態分析與計算[J].北京工業學院學報,1986(03):89-96.

發表會議論文：

[1]路俊虎,金磊,高世橋,劉海鵬,高春暉. 駐極體靜電俘能器的仿真分析和試驗驗證[C].中國力學大會-2017暨慶祝中國力學學會成立60周年大會論文集（B）.2017:1838-1842.

[2]劉海鵬,高世橋,金磊. 壓電-電磁復合式俘能器的性能測試[C].中國力學大會-2017暨慶祝中國力學學會成立60周年大會論文集（B）.2017:1869-1875.

[3]Liu, Haipeng*; Jin, Lei; Gao, Shiqiao.Design and Test on the Nonlinear Piezoelectric-electromagnetic Hybrid Energy Harvesting Structure.2017 7^th International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), 2017-08-07 To 2017-08-11.

[4]Xiao Xu; Shiqiao Gao; Haipeng Liu; Shaohua Niu; Zhuocheng OU. High-speed collision analysis of pouring sealant byusing of nonlinear viscoelastic model.4^th International conference on protective structures, China, 2016-09-21 to 2016-09-23.

[5]張冬梅; 高世橋; 劉海鵬; 牛少華; 劉宗寶.Real-time calculation forstriking velocity based on penetration deceleration. 4^th International conference on protective structures, China, 2016-09-21 to 2016-09-23.

[6]徐蕭; 高世橋; 牛少華; 申麗; 歐卓成.彈體內部結構的動態響應分析.第八屆全國強動載效應及防護學術會議, 中國, 2016-07-15至2016-07-18.

[7]張冬梅; 高世橋; 劉海鵬; 牛少華.彈引螺紋連接剛度及引信安裝頻率研究.第八屆全國強動載效應及防護學術會議, 中國, 2016-07-15至2016-07-18.

[8]Wang Caifeng*; Gao Shiqiao; Niu Shaohua; Liu Haipeng; Tan Yangkang. Analysis of Vertical Walking Force of Single Footstep.6^th International Conference on Manufacturing Science and Engineering (ICMSE), 2015-11-28 to 2015-11-29.

[9]Liu, Hai-peng*; Gao, Shi-qiao; Jin, Lei.Study on the output characteristics of piezoelectric-electromagnetic hybrid harvest structure.12^th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), 2016 to 2016-08-31.

[10]Gao, Shiqiao*; Zhang, Guangyi; Jin, Lei; Li, Ping; Liu, Haipeng.Characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams.12^th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA), 2016 to 2016-08-31.

[11]Wang Caifeng*; Gao Shiqiao; Jin Lei; Chen Linxiong.Ambient Vibration Survey and Vibration Serviceability Evaluation on Footbridges. International Conference on Chemical, Material and Food Engineering (CMFE), 2015-07-25 to 2015-07-26.

[12]張冬梅,高世橋,劉海鵬. 侵徹過程中螺紋連接結構的應力傳遞仿真分析[C].第六屆全國強動載效應及防護學術會議暨2014年復雜介質/結構的動態力學行為創新研究群體學術研討會論文集.2014:232-237.

[13]劉海鵬,高世橋,金磊. 彈侵徹混凝土靶面成坑機理分析[C].第六屆全國強動載效應及防護學術會議暨2014年復雜介質/結構的動態力學行為創新研究群體學術研討會論文集.2014:283-287.

[14]Liu, Haipeng*; Gao, Shiqiao; Jin, Lei; He, Yunli. Corner Effect of Micro-Comb Capacitive Structure.15th Annual Conference of the Chinese-Society-of-Micro-Nano-Technology (CSMNT) / 4^th International Conference of the Chinese-Society-of-Micro-Nano-Technology (CSMNT), 2013-11-03 To 2013-11-06.

[15]劉海鵬,高世橋,金磊. 彈丸侵徹多層混凝土靶的數值模擬與實驗[C].第五屆全國強動載效應及防護學術會議暨復雜介質/結構的動態力學行為創新研究群體學術研討會論文集.2013:322-329.

[16]Guan, Yanwei; Gao, Shiqiao; Shen, Li; He, Yunli.Study on effect of van der Waals force and Casimir force to microsystem.2013 2^nd International Conference on Measurement, Instrumentation and Automation, ICMIA 2013, China,Guangxi Zhuang Autonomous Region,Guilin, 2013-04-23 to 2013-04-24.

[17]Niu, Shaohua; Gao, Shiqiao; Du, Jingqing.A calculation model of pull-off force with edge-effect.2^nd International Conference on Opto-Electronics Engineering and Materials Research, OEMR 2013, 2013-10-19 to 2013-10-20.

[18]Liu, Haipeng; He, Yunli; Gao, Shiqiao; Tan, Yangkang; Jin, Lei.Structure simulation analysis of piezoelectric energy harvesting device.2013 International Forum on Mechanical and Material Engineering, IFMME 2013, China,Guangdong,Guangzhou, 2013-06-13 to 2013-06-14.

[19]Zhang, Zhenquan*; Liu, Haipeng; Gao, Shiqiao.The design of the closed-loop control system of micro machined gyroscope.2^nd International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC), 2012-12-08 To 2012-12-10.

[20]Shen, Li; Gao, Shiqiao; Guan, Yanwei.The effect of casimir force to the performance of the micro-accelerometer.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[21]He, Yunli; Liu, Haipeng; Gao, Shiqiao; Wang, Caifeng.Capillary condensation adhesion phenomena and analysis of the micromechanical gyroscope.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[22]Jiang, Anran; Gao, Shiqiao; Yao, Fenglin; He, Yunli.Structure design and simulation analysis of multiple micro piezoelectric cantilevers.14^th Annual Conference and the 3rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[23]Niu, Shaohua; Hong, Dandan; Gao, Shiqiao; Niu, S.*.A PID&AGC method for micro vibration gyroscope drive system.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[24]Li, Ping; Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Shi, Yunbo; Li, P.*.Influence of package on micro-accelerometer sensitivity.14th Annual Conference and the 3^rd International Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, China,Jiangsu,Changzhou, 2012-11-04 to 2012-11-07.

[25]Liu Haipeng; Zhang Zhenquan; Gao Shiqiao; Jin Lei.Analysis on the sticking failure of micro-comb driving structure.14th Annual Conference and the 3^rdInternational Conference of the Chinese Society of Micro-Nano Technology, CSMNT 2012, 2012-11-04 to 2012-11-07.

[26]劉海鵬,高世橋,金磊. 彈丸侵徹多層混凝土靶的數值模擬與實驗[C].第五屆全國計算爆炸力學會議論文摘要.2012:73.

[27]劉宗寶,高世橋,杜井慶. 測量數據剔除粗大誤差與平滑處理的一種算法[C].第三十一屆中國控制會議論文集D卷.2012:1819-1824.

[28]Liu, Zongbao; Gao, Shiqiao; Yao, Fenglin; Du, Jingqing; Liu, Z.*. Hardware-in-the-loop simulation system of penetration fuze based on labVIEW.2012 International Conference on Advances in Mechanics Engineering, ICAME 2012, 2012-08-03 to 2012-08-05.

[29]Yuan, Xiaodong*; Gao, Shiqiao. One Kind of Flight Control System Design for Separation Section in Cruise Missile.2^nd International Conference on Mechatronics and Intelligent Materials (MIM 2012), 2012-05-18 to 2012-05-19.

[30]Li, Ping*; Shi, Yun-Bo; Lu, Jun; Gao, Shi-Qiao.Study on a novel MEMS high G acceleration sensor.2^nd International Conference on Mechatronics and Intelligent Materials (MIM 2012), 2012-05-18 to 2012-05-19.

[31]Shen Li*; Gao Shiqiao; Zhang Zhenquan; Jiang Anran. Microscale Effect of Elastic Beam of The Micro-machined Gyroscope.International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), 2012-07-27 to 2012-07-29.

[32]Shen Li*; Gao Shiqiao; Jiang Anran; Wang Caifeng. Analysis of Micro Structure's Elastic Stiffness.International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), 2012-07-27 to 2012-07-29.

[33]Gao, Shiqiao*; Wang, Dong; Jin, Lei. Influence of the Human Body on the Characteristics of A Pedestrian Bridge.18th ISSAT International Conference on Reliability and Quality in Design, 2012-07-26 to 2012-07-28.

[34]Liu, Hai-peng*; Gao, Shi-qiao; Jin, Lei.Analysis on the Detection Capacitance of Comb Micro-Machined Gyroscope.2^nd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2011), 2011-12-11 to 2011-12-13.

[35]劉海鵬,高世橋,金磊. 彈丸侵徹混凝土靶板成坑實驗及量綱分析[C].第十屆全國沖擊動力學學術會議論文摘要集.2011:64.

[36]Li, Minghui; Deng, Jiahao; Gao, Shiqiao; Li, M.*.Novel touch mode capacitive pressure sensor based on SiC.IEEE 2011 10^th International Conference on Electronic Measurement and Instruments, ICEMI 2011, China,Sichuan,Chengdu, 2011-08-16 to 2011-08-18.

[37]The dynamic characteristics of a couple system by pedestrian bridge and walking persons
Wang, Dong; Gao, Shiqiao; Kasperski, Michael; Liu, Haipeng; Jin, Lei; Wang, D.*
2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011, 2011-08-22 to 2011-08-23.

[38]Wang, Dong; Gao, Shiqiao; Kasperski, Michael; Liu, Haipeng; Jin, Lei; Wang, D.*.Simulation of the dynamic characteristics of the coupled system structure.2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011, 2011-08-22 to 2011-08-23.

[39]Yao, Fenglin; Gao, Shiqiao; Wang, Caifeng; Yao, F.*. Stiffness computation of a decoupled micro gyroscope and the effect of machining error.2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce, AIMSEC 2011, China,Henan,Zhengzhou, 2011-08-08 to 2011-08-08

[40]Yao, Fenglin*; Gao, Shiqiao; Liang, Xinjian. Lengthwise Detection of High Linearity Micromachined Gyroscope.International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM2011), 2011-06-23 to 2011-06-24.

[41]Niu, Shaohua*; Gao, Shiqiao; Liu, Haipeng; Jin, Lei. An ADRC Method for Vibrating MEMS Gyrosocope Drive.International Conference on Mechatronics and Intelligent Materials, 2011-05-21 to 2011-05-22.

[42]Du, Jingqing; Gao, Shiqiao; Niu, Shaohua; Du, J.*.Design and realization of hard-target intelligent detonation fuse.2010 International Conference on Intelligent Computation Technology and Automation, ICICTA 2010, China,Hunan,Changsha, 2010-05-11 to 2010-05-12.

[43]Du, Jingqing; Gao, Shiqiao; Niu, Shaohua; Du, J.*.An algorithm for measurement data eliminating noise and smoothing.2010 3^rd International Conference on Advanced Computer Theory and Engineering, ICACTE 2010, China,Sichuan,Chengdu, 2010-08-20 to 2010-08-22.

[44]Du, Jingqing; Gao, Shiqiao; Du, J.*.Hardware-in-the-loop simulation of a projectile penetrating half-infinite concrete targets.29^th Chinese Control Conference, CCC'10, China,Beijing, 2010-07-29 to 2010-07-31.

[45]杜井慶,高世橋. 彈侵徹半無限厚混凝土靶的半實物仿真[C].第二十九屆中國控制會議論文集.,2010:4321-4325.

[46]Shi, Ji-Tao*; Gao, Shi-Qiao.RESEARCH OF OVERCROSS STRUCTURE DYNAMICS MODEL AND SECURITY BY PEDESTRIAN LOAD.11^th International Symposium on Structural Engineering, 2010-12-18 to 2010-12-20

[47]Du Jingqing*; Gao Shiqiao; Yao Fenglin; Luo Chuang; Liu Haipeng.An Improved Control Method Based on PID Algorithm.2nd IEEE International Conference on Advanced Computer Control, 2010-03-27 to 2010-03-29.

[48]Liu, Hai-peng*; Gao, Shi-qiao; Niu, Shaohua; Jin, Lei.The micro mechanical environment on the comb capacitive micro-machined gyroscope.2^nd International Conference on Smart Materials and Nanotechnology in Engineering, 2009-07-08 To 2009-07-11.

[49]Liu, Haipeng; Gao, Shiqiao; Niu, Shaohua.Analysis on Stiction of Micro-comb Structure in MEMS.14^th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), 2009-09-20 to 2009-09-24.

[50]Liang, X. J.; Gao, S. Q..The Adhesion Failure Analysis of the MEMS Gyroscope with Comb Capacitor.8^th International Conference on Reliability, Maintainability and Safety (ICRMS 2009), 2009-07-20 to 2009-07-24.

[51]Liang, X. J.; Gao, S. Q..A MEMS Capacitive Gyroscope with Improved Reliability.13^th International Manufacturing Conference in China, 2009-09-21 to 2009-09-23.

[52]劉海鵬,高世橋,梁新建. 一種基于空穴膨脹理論的侵徹混凝土修正模型[C].第九屆全國沖擊動力學學術會議論文集（上冊）.2009:309-310.

[53]劉海鵬,高世橋,金磊. 彈丸貫穿有限厚混凝土靶板實驗與仿真分析[C].第九屆全國沖擊動力學學術會議論文集（上冊）.2009:334-337.

[54]劉海鵬,高世橋,金磊. 彈侵徹混凝土靶面成坑分析[C].第九屆全國沖擊動力學學術會議論文集（上冊）.2009:338-342.

[55]杜井慶,高世橋,寧展. 基于PCI6040的全自動表面張力測量儀的設計與實現[C].2008中國儀器儀表與測控技術進展大會論文集（Ⅲ）.2008:235-238.

[56]Liu, Haipeng; Gao, Shiqiao; Jin, Lei; Liang, Xinjian.A modified model for penetrating into concrete target.7^th International Conference on Shock and Impact Loans on Structures, 2007-10-17 to 2007-10-19.

[57]Gao, Shiqiao; Jin, Lei; Liu, Haipeng; Liang, Xinjian; Han, Li.An analytical penetration model based on the normal cavity-expansion theory.7^th International Conference on Shock and Impact Loans on Structures, 2007-10-17 to 2007-10-19.

[58]Gao, Shi-qiao; Jin, Lei; Liu, Hai-peng; Li, Ming-hui; Kasperski, M..Responses of a nonlinear MEMS structural system loaded by a non-stationary stochastic excitation.5^th International Conference on Nonlinear Mechanics (ICNM-V), 2007-06-11 to 2007-06-14.

[59]Liu, Hai-peng; Gao, Shi-qiao; Jin, Lei.Influences of micro forces on manufacturing and packaging of micro inertial devices.5^th International Conference on Nonlinear Mechanics (ICNM-V), 2007-06-11 to 2007-06-14.

[60]梁新建,高世橋. 解耦型微機械陀螺儀氣體阻尼機理分析[C].2007'儀表，自動化及先進集成技術大會論文集（二）.2007:91-95.

[61]李明輝,高世橋. 解耦型微陀螺儀的設計、制作與性能分析[C].2007'儀表，自動化及先進集成技術大會論文集（二）.2007:60-64.

[62]杜井慶,高世橋,付德義,李明輝. 基于PID算法的控制量按線性函數變化的一種控制方法[C].2007'儀表，自動化及先進集成技術大會論文集（二）.2007:590-593.

[63]胡玉川,高世橋. 基于ARM與DSP的雷達信號處理機的設計[C].2006“數學技術應用科學”.2006:200-201-202-203-204.